EMS Hoop Tech Clamps

All of the ICTCS Clamps use a spring loaded clamping chassis to hold interchangeable upper and lower clamping windows. These windows clamp the fabric and backing between the upper and lower windows and hold the fabric in position during sewing. The ICTCS chassis/window assembly attaches to the embroidery machine using the same tubular arms that support regular plastic embroidery hoops. Adapter arm styles are available for nearly all major industrial embroidery machine manufacturers and machine types. If you are currently using plastic hoops, then chances are that we have an ICTCS clamp that fits your machine *.

Each size ICTCS Clamping System (1-2-3) has a number of window sizes available that are exclusive to each size clamp. These window sets, (upper & lower) are easily and quickly changed without any tools. Loosening a single knob releases the bottom window from the chassis base, and the top window is released from the clamp top pins by gently spreading the support arms. The changeover takes less that a minute.

The ICTCS-1 has 6 available window sizes. 3 rectangular windows and 3 windows designed for sewing on the sides and back of caps. The largest window for the ICTCS-1 is 4.5 x 4.5”.

The ICTCS-2 has 7 available window sizes. 6 rectangular/square and 1 round, (that can also be used to sew the back of caps). The largest window for the ICTCS-2 is 7.5 x 6.0”